Bluetooth is a radio technology, which means it is sensitive to objects between the headset and the connected device. It is designed for the headset and the connected device to be used within 10 meters (33 feet) of each other, with no major objects in the way (walls, etc.).

You may have deleted your headset pairing connection in your mobile phone - follow the pairing instructions in ‘Pair Your Headset to a Phone or other Device’.

These features are dependent on the ability of your phone to support a hands-free profile. Even if the hands-free profile is implemented reject call, call hold and voice dialling are optional features which are not supported by all devices. Please consult your device manual for details.

Please note that some features can only be operated from the primary device e.g. voice dial using Jabra EXTREME with 2 mobile phones.

• It is possible to reset and test the headset by ’pressing and holding’ all three buttoms at the same time. The red, blue and green light will light up in a white light. In this mode, the pairing list is reset, and you can test if the headset works as you will be able to hear audio in the speaker from the microphone.
  
• The headset will automatically turn off after approx. 10 seconds. The next time you power on, the headset will go into pairing mode as the first time you powered your new EXTREME on.

Increase the volume on your phone
Ensure that the headset is paired to the device that you wish to use.
Make sure your phone is connected to the headset by tapping the Answer/End button.

The Jabra EXTREME is designed to work with Bluetooth mobile phones. It can also work with other Bluetooth devices that are compliant with Bluetooth version 1.1 or higher and support a headset, hands-free and/or advance audio distribution profile (A2DP).

Pair your headset again to the device in order to avoid this behavior.

1. Ensure that the headset is on. If the music streaming has started, turn the music player on the phone off.
2. Press and hold the answer/end button for approx. 5 sec. until the light turns to solid blue.
3. Continue to press and hold the answer/end button until the solid blue light turns off
4. Continue to press and hold until a solid purple light turns on. Go through the regular steps in pairing the headset to a Bluetooth device.